Just like a good dress can be made better with the perfect shoes and necklace, the xTool P2 laser can be made better with accessories as well! Here are the accessory options for the xTool P2 55W CO2 laser and the reasons they can enhance your laser experience!
Accessories are not needed in order to create amazing projects with the xTool P2 laser, however, they can take your experience up a notch if you are looking to make projects or use mediums that are not always flat! Let’s get into the accessories, what they do and where you can buy them!
NOTE ABOUT PURCHASING:
I work with xTool and ordering from their direct website is completely safe and effective. They also have an Amazon storefront and you can order from xtool via Amazon as well. My code will only work on xTool’s site.
Use thatswhatchesaid for $50 off.
Riser Base
One of the most amazing things about xTool lasers is that you can remove the bottom plates, prop them up and use them to laser engrave taller objects. The xtool M1 comes with some blocks that can assist with this but if you are going to be doing taller projects more frequently, the Riser Base is the way to go. Like the M1, the P2 also has a riser base that fits perfectly under the laser in order to raise the laser head so that you can engrave on materials that are taller in nature!
Without the riser base and tray, the maximum workspace height is 2.5″ (64mm). If you remove the tray you can gain a smidge more height at 2.7″ (72mm).
Adding the riser base gives you an 8.1″ (208mm) height with the tray and a whopping 8.4″ (215mm) without the tray! That is some serious height for engraving!
The riser base also helps with the accessories we will discuss below, the honeycomb panel, automatic passthrough conveyor, and the rotary attachment. I will touch on the riser base contributions to these accessories below!
Honeycomb Panel
The honeycomb design of the tray allows for fewer small pieces dropped into the crumb tray for increased efficiency in your process. It is great for batching small items but is also built to hold a load capacity of 5kg. The design of the honeycomb panel can also help with smoother edges and a cleaner surface after cutting.
This accessory may be used with or without the riser base.
Included with the P2 honeycomb accessory are four material pins to help secure materials in place and a cleaning brush. The panel has anti-slip foot pads to prevent the panel itself from moving.
The panel itself is 23.1″x12.2″x0.87″ and has a processing area of 21.9″x11″. It weighs 2.06kg and has a maximum workspace height of 0.87″ without the riser base and 6.93″ with the riser base.
RA2 Pro Rotary Attachment
The RA2 Pro is the first 4-in-1 rotary attachment for a laser engraver. The RA2 has a roller rotary, chuck rotary, sphere rotary, and ring rotary abilities.
RA2 is not only compatible with xTool Creative Space Software but also with other brands such as Lightburn and LaserGRBL.
The riser base, detailed above, allows for a maximum workspace height of 7.1″ (180mm) for the roller and 3.9″ (100mm) for the chuck vs a height of 1.6″ (42mm) and 3.9″ (100mm) respectively. The riser base plays nicely with other accessories :)
The chuck feature has a 4:1 gear ratio and a 50mm diameter.
The Rotary also works with xTool D1, D1 Pro, and the M1 machines.
I have engraved tumblers and wine tumblers with mine and absolutely love it!
Automatic Conveyor
The Automatic Conveyor Feeder allows larger projects! The maximum processing area is a whopping 118″x19.6″ and engraves effortlessly. No longer will you need to manually feed “larger than mat” projects, you can now cut and engrave automatically with the feeder.
This is perfect for front porch leaner signs and those fun big nursery names from wood! The maximum thickness of plywood for the automatic conveyor is 14mm. It is strongly recommended to obtain flat boards for anything over 9mm to keep the accuracy intact.
The riser base allows for a maximum pass-through height of 4.5″ (115mm) for up to 700mm width.
The conveyor comes in 39″ Basic size, added 25.5″ conveyor rail or the all in one kit for up to 90″.
xTool Smoke Purifier
Lasers must be vented and if you are in a room or place in your home or workspace without proper ventilation, the xTool Smoke Purifier can lend a hand. The Smoke Purifier is compatible with the P2, M1, D1, D1 Pro, S1 and Laserbox Rotary. This model will not work with the F1.
The Smoke Purifier has a 3-layer filtration with activated carbon and HEPA filters to achieve a 9997% purification rate. It gives a less than 55dB noise rate so great for a quiet or shared workspace.
Fire Safety Set
The xTool Fire Safety Set is available in the US only. It includes auto fire detection and fire extinguishing capabilities. It is compatible with the xTool D1, D1 Pro, M1, P2, and Laserbox. It is compatible with all 155nm blue diode lasers or CO2 laser machines that are in a 0.13m cubic enclosed space.
The fire safety set has auto flame detection, auto alarm triggering, auto power cut, auto fire extinguishing, and safe & clean CO2 gas.
Leave A Reply!